Work With Us

Job – Application Engineer

Location– Remote (currently)/Thane

Basic Details–

Organization Name: R.K. Control Instruments Pvt. Ltd.
Industry: Control Valve Manufacturing
Work Location: Remote (currently)/Thane
Reports to: Application Manager
Department: Application
Working days: Saturday to Thursday
Timing: 8:30 am to 5:30 pm
Website: http://rkcipl.co.in

Description–

Performing detailed reviews of customer specifications, providing comments, clarifications and
alternatives to customer requirements.
• Sizing and selection of valves, actuators and preparing techno-commercial quotations as per
customer’s technical requirements.
• Coordinating with client and internal departments as required, in order to minimize technical and
cost risk.
• Sending quotations accurately and on-time, including all technical and commercial, terms and
conditions, customer documentation requests.
• Participating in the customer negotiation process, including commercial and technical
negotiations.
• Performing PO reviews to ensure that all critical elements are correct and take up with Sales
engineer and/or customer in case of any discrepancies, and get PO amendment if required.
• Creating the order transfer file for submission to the factory in accordance with PO.
• Supporting factory for any post order activities.

Specifications–

Minimum Requirements
Education:
• BE (Instrumentation/Mech.) – Mandatory
Experience:
1 to 4 years of experience in the application profile in control valve or related industry.
Skills/Competencies:
• Knowledge of GA drawings
• Communication skill
• Presentation skill
• Negotiation skill
• Team player
• Humility
• Learning oriented
• Proactive
• Should have Customer focus
• Understand Customer needs

Contact Us : rkcipl.hr@gmail.com

Job – Design Engineer

Location– Thane West (Factory)

Basic Details–

Organization Name: R.K. Control Instruments Pvt. Ltd.
Industry: Control Valve Manufacturing
Work Location: Thane West (Factory)
Reports to: Design Manager
Department: Design
Working days: Saturday to Thursday
Timing: 8:30 am to 5:30 pm
Website: http://rkcipl.co.in

Description–

a. Design and Development
• Design and develop Globe/Angle/ Butterfly control valve body, end connections & trim
parts (contour & anti-cavitation multistage) as per ASME B16.34 / IBR/ API standard up to
2500 # pressure class in line with ASME Y 14.5 & releasing for manufacture.
• Design of multistep, multipath trim which can take pressure drop above 100 bar with noise
control.
• Plug (Contour profile), cage guide as per characteristics.
• Calculate Trim exit flow area and velocity as per Valve CV.
• Value engineering to reduce cost of valves.
• Body thickness as per IBR/EN/ASME, bolting, Gaskets, pressure parts.
• Face to face standard globe valves considering ASME/ISA standards.
• Prepare and finalise 2D and 3D drawings for castings, housings, control valve assemblies
and components.
• Document and control revision of the drawings, retrieve old/void drawings and ensure latest
revision is available for production.
• FEA Analyzer – Conducting Finite Element Analysis on New Development Products and
reviewing them.
• CFD Analyzer – Conducting Computational Fluid Dynamic Analysis and reviewing them.
• Conduct trials, identify specific change and make final modifications in components for
routine production.
• Test and validate the produced valves.
• Design customised valves for Low Temperature and cryogenic service.
• Actuator selection & trip time.
• Develop valve sizing and selection programme as per ISA standards.

b. Contract Review
• Technical study/Review of customer specification & control valve data sheet (CVDS)
suggesting best material to suit pressure & temperature conditions (Cryogenic, NACE, Anti
surge, Steam turbine bypass etc.) Interaction with sales department about deviation from
specification.
• Metallurgy tests and other special tests requirements and preparation of ITP.
• Schematics for control valves as per trip time, Volume tank required.

c. BOM Preparation & checking
• Select Material for trim, bolting, gasket, packing as per pressure & temperature, NACE,
boiler, oil – gas & hydrocarbon, CCGT power plant application. Considering galling,
erosion.
• Generate ERP code of new parts & control valve.
• Prepare master hook up diagram (schematics) of positioner, solenoids as per logic of control
valve i.e., fail close/open/freeze, required trip time etc.
• Catalogue, code and feed new material in ERP

d. Process Engineering/Improvement
• Coordinate with customers for understanding their technical requirements and facilitating the
internal departments for developing and improving the technical documents.
• Handle product development process involving planning, design execution, development,
product/ component costing, cross-functional coordination, testing and release for production
phases.
• Troubleshoot problems occurring in control valves
• Implement new projects regarding Process Improvement.
• Conduct product related trainings.
• Prepare and co-ordinate ISO related activity in the department.

Specifications–

Minimum Requirements
Education:
• BE (Mech.) – Mandatory
Experience:
1 to 4 years of experience from the control valve manufacturing industry.

Skills/Competencies:
• AutoCAD
• 3D Modelling – SolidWorks
• Knowledge of BOM
• Co-ordination
• Communication skills
• Attention to detail
• Desire to learn and upgrade constantly

Contact Us : rkcipl.hr@gmail.com

Job – Production Engineer

Location– Thane West (Factory)

Basic Details–

Organization Name: R.K. Control Instruments Pvt. Ltd.
Industry: Control Valve Manufacturing
Work Location: Thane West (Factory)
Reports to: Production Manager
Department: Production
Working days: Saturday to Thursday
Timing: 8:30 am to 5:30 pm
Website: http://rkcipl.co.in

Description–

1. Manufacture quality products as per specifications, efficiently on time, by planning, organizing
and monitoring work flow.
2. Complete the production plan by scheduling and assigning personnel, establishing priorities,
monitoring progress, revising schedules, resolving problems, maintaining quality.
3. Production Planning and Control in Machine Shop & Assembly department
4. Indenting materials in ERP as per BOM and stock availability
5. Preparing Material Requisition and Issuing material for machining/assembly
6. Material Demand management & forecasting as per Job order
7. Production Floor Inventory management
8. Co-ordinating with design, procurement, production, quality, store, sales & marketing.
9. Daily production planning, work allotment and manpower planning & management
10. Providing production plan to Machine Shop & tracking the same for avoiding shortage in
assembly section.
11. Solving any problem faced during assembly and testing
12. Quality inspection and testing of in-process and final product and issuing test certificate
13. Preparing daily, weekly and monthly MIS reports
14. Implementing all quality procedures related to ISO.
15. Maintaining on time delivery and quality.
16. Quick resolution of customer complaints
17. Tracking the production report on a daily & monthly basis and ensure with planned schedule.
18. Identifying bottlenecks in the process & reduce the lead time with lean manufacturing tool,
streamline the process.
19. Creating & implementing 5S, Quality Circle, shop-floor discipline and housekeeping.
20. Maintaining safe and clean work environment by educating and directing personnel.
21. Ensuring operation of equipment by periodic maintenance, calling for repairs; evaluating new equipment and technique

Specifications–

Minimum Requirements
Education:
• BE (Mech.) – Mandatory
Experience:
5 years and above of experience from the control valves manufacturing industry.

Skills/Competencies:
• Managerial Skills
• Communication skill
• Planning and organizing skills
• Attention to detail
• Problem-Identification and solving ability
• Optimum utilization of resources
• Knowledge of engineering drawings
• Knowledge of CNC, Lathe & Welding
• Knowledge of ERP package
• Possess knowledge of fabrication, machining processes, quality & assembly

Contact Us : rkcipl.hr@gmail.com

Job – QC Executive

Location– Thane West (Factory)

Basic Details–

Organization Name: R.K. Control Instruments Pvt. Ltd.
Industry: Control Valve Manufacturing
Work Location: Thane West (Factory)
Reports to: QA Manager
Department: Quality Control
Working days: Saturday to Thursday
Timing: 8:30 am to 5:30 pm
Website: http://rkcipl.co.in

Description–

a. Receipt & In-process QC
1. To carry out inspection and record the results of material inward.
2. To verify and compare product with the specification given in the Work Order.
3. To prepare and maintain inspection and test records.
4. To verify and correlate vendor’s test certificates with the product during receiving inspection.
5. To maintain vendor’s Test Certificates.
6. To coordinate and carry out inspection at vendor’s premises wherever specified in the
purchase documents.
7. To ensure that conforming materials are used for the production and that inspection results are
available.
8. To maintain Positive identification and recall register for receiving inspection.
9. To perform in-process inspection of machined components and maintain records as applicable.
10. To identify the non-conformity during receiving inspection, maintain non-conformity log and
ensure that all NCRs are closed.
11. To present the non-conformity log during management review meeting.
12. To ensure that only calibrated measuring and test instruments are used during inspection.
13. To understand and follow the quality plan.
14. To follow the applicable documented procedures.
15. Being an auditee to give necessary information to auditors, acknowledge CARs, and carry out
corrective actions as specified in the CAR.
16. To report any problem faced in implementing or maintaining the quality system to the
superiors.
17. To understand the Quality Policy and follow the same.
18. Prepare the MIS reports and demonstrate compliance to the Quality Objective, as specified in
the Key Process Sheet.
19. Implement corrective actions to ensure the Quality Objectives are met.
b. Final QC
• To perform and accept the final check of finished valves.
• To authorise dispatches and test certificate of finished products.
• To maintain product identification and traceability of finished valves till dispatch.
• To raise Non-Conformance Report (NCR) when the products released under positive
identification and recall procedure are found non-conforming.
• To update the Checklist

Specifications–

Minimum Requirements
Education:
• BE (Mech.) / D.M.E – Mandatory
Experience:
3 years and above of experience from manufacturing industry of engineered products.

Skills/Competencies:
• 7 QC tools
• Ability to read and understand engineering drawings
• Knowledge of measuring and testing instruments
• Attention to detail
• Time management
• Conversational ability
• Agility and hard-working
• Problem-solving approach
• Ability to operate under pressure

Contact Us : rkcipl.hr@gmail.com

Job – Regional Sales Manager

Location– Thane West (Factory)

Basic Details–

Organization Name: R.K. Control Instruments Pvt. Ltd.
Industry: Control Valve Manufacturing
Work Location: Thane West (Factory)
Reports to: MD of Organization
Department: Sales
Working days: Monday to Friday, 1st and 3rd Saturday
Timing: 9:00 am to 6:00 pm
Website: http://rkcipl.co.in

Description–

• Proactively develop new customer contacts and build long-lasting business
relationships.
• Develop sales strategies that ensure attainment of company sales goals and profitability.
• Secure new business by developing, evaluating, identifying prospective customers and
creating a strategy with an action plan to realize the potential of these new business
opportunities.
• Perform need analysis to understand and target companies’ buying needs and
objectives.
• Manage, orchestrate, direct proposal presentations, oral presentations, and client
meetings.
• Maintain billing records of existing clients and retrieve payments.
• Achieve sales & booking target month on month for the region
• Make 3- 4 customer visits/day viz. End Customer, EPC, Consultants & Contractors
• Travel outstation – 12-15 days
• Competition tracking
• Regular updating of CRM
• Prepare and maintain daily as well as monthly customer report and MIS report.
• Maintenance of new project tracker and sales funnel

Specifications–

Minimum Requirements
Education:
• BE (Instrumentation/Mech.) – Mandatory
• Masters in Marketing Management/ Business Management – Preferable
Experience:
10 years and above experience from control valves manufacturing or related industry.

Skills/Competencies:
• Communication Skills
• Presentation Skills
• Negotiation Skills
• Probing Skills
• Customer-centric
• Customer Relation Management
• Integrity
• Drive for results
• Closing Ability
• Proactive & self-starter
• Willingness to work and learn
• Pleasing personality as an enabler to build relationship
• Demonstrated success in corporate sales

Contact Us : rkcipl.hr@gmail.com

Job – Sales Engineer

Location– Thane West (Factory)

Basic Details–

Organization Name: R.K. Control Instruments Pvt. Ltd.
Industry: Control Valve Manufacturing
Work Location: Thane West (Factory)
Reports to: Sales Manager
Department: Sales
Working days: Monday to Friday, 1st and 3rd Saturday

Timing: 9:00 am to 6:00 pm
Website: http://rkcipl.co.in

Description–

• Drive sales by understanding technical requirements of customers
• Devise sales strategy
• Plan journey cycle to ensure efficiency of visits
• Carry out visits to the customer’s premises / offices to generate enquiries.
• Forward the enquiries to Application team.
• Follow-up the offers with customer.
• Receive the Customer’s POs and forward to the Application team.
• Follow up with the customer support / factory for the delivery and communicate the same with
customer.
• Obtain the customer satisfaction / feedback from Customer.
• Resolve customer complaints, if any.
• Maintain a record and follow-up the debtors
• Stay up-to-date with the competition and the industry knowledge.
• Proactively develop new customer contacts and build long-lasting business relationships.
• Take complete responsibility of specified Area/Region to achieve the desired goals

Specifications–

Minimum Requirements
Education:
• BE (Mech./ Instrumentation) – Mandatory
Experience:
5 years and above of experience from the control valves manufacturing or relates industry.
Skills/Competencies:
• Good communication (oral and written) skills
• Presentation Skills
• Negotiation skills
• Probing skills
• Customer centric
• Willingness to travel
• Closing ability
• Learning-oriented
• Desire for success

Contact Us : rkcipl.hr@gmail.com

Job – Store Manager

Location– Thane West (Factory)

Basic Details–

Organization Name: R.K. Control Instruments Pvt. Ltd.
Industry: Control Valve Manufacturing
Work Location: Thane West (Factory)
Reports to: MD of Organization
Department: Stores & Warehouse
Working days: Saturday to Thursday
Timing: 8:30 am to 5:30 pm
Website: http://rkcipl.co.in

Description–

• To receive material from the vendor at receipt.
• To verify the quantity of the received goods along with the challan / invoice and purchase order.
• To authorize GRN.
• To make arrangements for proper storage of accepted materials and finished goods.
• To follow FIFO for materials with shelf life.
• To maintain BIN cards for the stored materials / castings, where BIN cards are not possible to
maintain & make an excel spread sheet to keep track.
• To calculate ROL and MOQ and maintain inventory levels.
• To issue material to the production department against proper and authorized requisition.
• To keep an eye on different stock levels and issue purchase indent to the purchase department on
time for each work order.
• Periodic comparison of physical stock with system stock.
• To keep warehouse neat and tidy.
• To prevent unauthorized persons from entering stores.
• To send back surplus material received from vendor.
• To receive non-conforming parts / materials from all departments and inform QC accordingly.
• To approve vendors for subcontracting.
• To prepare and maintain a list of approved vendors for subcontracting and their evaluation report.
• Make gate pass / challan for subcontracting.
• Follow up for the subcontracted materials.
• Send back rejected material with proper documentations.
• Get quotations for subcontracting jobs and approve them.
• Make MIS reports
• Proper coordination with planning, production, purchase and QC for all day-to-day activities.
• Able to identify risks and propose mitigation plan to overcome the same.
• Maintain identification and traceability in the stores.
• Follow up with suppliers and transporters for timely delivery of material.

Specifications–

Minimum Requirements
Education:
• BE (Mech.) / D.M.E / B.B.A./B.Com + PG – Mandatory
• Masters in Materials Management- Preference
Experience:
10 years and above of experience from manufacturing industry of engineered products.
Skills/Competencies:
• Understanding of different material specifications like castings, bar stock, and other engineering
components
• Knowledge of ERP, 5s, ISO 9001-2015 and material management.
• Commercial Knowledge relating to quotation, delivery, Payment Terms etc.,
• Vendor Management
• Negotiation skills,
• Time Management
• Attention to detail
• Managerial Ability
• Analytical Ability
• Agility
• Hardworking
• Ability to operate under pressure
• Good communication (oral and written) skills
• Good Understanding of Microsoft Office
• Proactive & self-starter

Contact Us : rkcipl.hr@gmail.com